More details about the T10
The T-10 has been built for use with a wide variety of vegetables including
tomatoes, onions, carrots and sugar beets.
The unit planters have been used by a large number of growers with great
satisfaction under various soil and field conditions. With correct assembly
and adjustment, the planter will prepare the seedbed at even depth. Spacing
of planter can be easily done since each unit is mounted independently.
This ground drive unit is a complete one row planter in itself Each unit is
furnished with 3 metal seed plates and intergral clamp suitable for
mounting on 2 1/4" tool bar.
The clamp will also accommodate a 5/8" x 2 flat shank for ripping or
cleaning the bed. Three style shoes are available.
With good soil preparation and careful tool bar assembly and adjustment,
the Technohac Vegetable planter will give you a good crop stand.

This seeder set contains six independent one-row seeding units attached to
a hollow square tool bar complete with headstock for three-point linkage
attachment.
Precleaners and ridgers attached to the tool bar make this machine a
complete unit for seed bed preparation and seeding in one operation.
Precleaners remove clods and weed away from runner paths and facilitate
seeding at even depth in the lower moist soil layer, for better germination.
Ridgers correct seed bed contour especially in flood irrigated areas.
Automatic markers ensure straight rows at prefixed spacings.
Seeder unit spacing on tool bar is easily adjusted to suit required row
spacings, and distance.
Each seeder unit is equipped with a double spring shock absorber and is of
heavy, sturdy construction to avoid damage during operation and while being
transported on the tractor hydraulic system.
Seeder units are equipped with high tensile steel furrow opener, seed
coverer and heavy split rollers.
Each unit is supplied with three interchangeable seed plates with a total
of 39 holes, giving ample possibility of adjustment for a great variety of
seeds of all sizes.
A guide chart is also attached.
Rubber press wheel for wet soil conditions are available as an extra accessory.
Special runners for arid conditions, with "strip" sowing, are
also available as extra equipment.

The seeder is equipped with furrow openers, coverers, press wheels and
ground wheels.
A conveniently placed lever engages and disengages the seeding mechanism.
Each unit is equipped with three inter-changeable seed plates containing a
total of 39 seed holes, assuring ample adjustment possibilities for a
large variety of seed, ranging from the smallest seeds to onion seed.
A seed plate guide is supplied with each unit.